T-SERIES Separating solids from liquids can be an important means to maintain mud properties or to remove solids from contaminated fluids and comply with environmental directives. Selecting the correct centrifuge for the job can result in significant savings. The Task range of decanting centrifuges have been developed for efficient and economical separation of liquid and […]

Offshore mudcoolers need to comply with specific requirements. Apart from robust and compact construction, they sometimes must be able to meet strict environmental standards set by authorities. Task has developed a range of offshore mudcoolers that will meet any demand. They all share a modular design, which allows them to be easily adapted or built […]

Mud cooling is essential in most HP/HT Geothermal drilling operations and geothermal well testing. Drill bit friction, down hole formation temperatures and other factors increase mud temperatures, changing physical properties of the mud, which may create hazards for the safety of personnel and drilling/well equipment. Task is a company of specialists dedicated to avoiding these […]

T-OSB-35 Task disc separators are valuable instruments for the efficient processing of waste materials and the recovery of useful material from slop oil, lowering storage and dumping costs and offering an environmentally friendly alternative to traditional procedures for the processing of waste material. They can be operated with water as a control medium or low-viscosity […]

Eliminating gases from mud is one of the first steps in drilling operations, and Task has developed a compact and reliable solution for this job: the VDG-series vacuum degasser. They are specifically designed for efficient degassing of drilling mud: by way of a 29 mm Hg vacuum drilling mud is conveyed from the well into […]

WTS-600 On drilling and storage locations drainage and scrub water may be contaminated by a variety of substances which may interfere with environmental friendly procedures or increase the costs of its treatment. Task has developed a water treatment unit to bring drainage and scrub water up to the standards for disposal into sewage systems or […]

TVD-SERIES In drilling operations the Task TVD-series of cuttings dryers reduces the amount of waste material, and therefore reducing transportation and disposal costs. They will also help recover reusable drilling fluids, resulting in additional cost savings and enhanced environmental performance. Task cuttings dryers are designed for optimum liquids / solids separation and will reduce the […]

TFU-3000 In situations where liquid should be free of suspended solids, the Task automatic flocculation unit TFU-3000 takes care of the flocculation of these solids, which subsequently can be removed by centrifuging. It is a fully automatic installation with separate compartments for the preparation of the flocculation solution, its ripening and the dosage of the […]

TKL-SERIES The Task TKL-series are especially designed for use in the drilling industry. High G-force in a shaker is essential to convey the amount of cuttings generated while drilling hole, to dewater drill cuttings to reclaim expensive drilling fluids, and to minimize waste. While drilling top hole sections, where heavy, high volume cuttings are typically […]

TMC-SERIES Combining mud cleaning equipment based upon varying physical principles may give you the best of several worlds. With one set of equipment, you will be able to eliminate any particles larger than 15-20 microns. This will allow you to meet most environmental demands and save substantially on your operational costs. The mud cleaner combination […]